DIPPING TANKS FOR WOOD IMPREGNATION - “DT” MODEL
In this type of plant, wood impregnation is achieved by immersion of semifinished product
into a heavy duty tank filled with the preservative solution.
Wooden products are placed on a fork and locked with an anti-floating device. The fork
(moved with a control push-button with cable) moves vertically down into the tank.
This type of machine is used for the treatment of wood in risk class II (according to the UNI EN 335-1 - Table A), ie, the wood treated with these plants is protected by casual contact humidity
Technical details:
» Tank made in heavy duty carbon steel sheet, with reinforcements for containment of
preservative solution.
» Load fork for semifinished wood products, moved by a hydraulic cylinder.
» Pusher moved my a hydraulic cylinder, with anti-floating function for wooden products.
» Hydraulic power unit, provided with an electrical sensor for oil level.
» Manual lever valve, placed on the bottom of the tank for solution discharge.
» Electrical mixers (n°2) for preservative solution mix.
» Electrical panel for control.
» Control push-button with cable (L=10 m) for fork control at distance.
» Vertical motion mechanism designed for the highest reliability.
» Steel surface protection:
» Internal surfaces for tank and fork painted with bicomponent epoxy coating.
» External surface of tank painted with epxy primer and finishing synthetic paint.
» Options: automation of immersion with dipping time settable with a timer.
Our products are manufactured in compliance with the european laws that define the EU’s health,
safety and environmental protection requirements.
- Italy
- Новые
