Four sides moulder MAGIC mod. FORMA 22-6 with grooved tables
Machine frame
• Base in full cast-iron torsion free
• Grooved Tables
• All tables and guides have rectified finishing
• Both the in-feed table, standard 2.000 mm. long, and the side fence are adjustable by means of a parallelogram system to guarantee quick and accurate positioning
• Table lubrication by manual pump
• All mechanical controls for setting and adjustment of the machine are positioned in-line on the front of the machine itself
• Any setting operation allowed by the safety rules when machine switched on can be executed from outside without opening the sound proof cabin
• Mechanical readout for any single adjustment
• Feeding system made by gears and cardan joints, without chains, both for upper rolls and feeding rolls underneath the working table
• Feeding motor with variable speed
• Pre-feeding roll fitted before the first bottom horizontal cutter-head
• Pneumatic pressure on all the feeding system, divided in sections for toothed and rubber rolls
• Additional device for short pieces
• Pressing pad in exit of the top horizontal spindle made in sections and adjustable on the tools diameter
• Digital readout of the feeding height
• Electrical lifting of feeding system
• Electrical lifting of 6th head
In-feed table 2.000 mm
Working width mm. 20 ÷220
Working height mm. 8 ÷120
Spindles diameter mm. 40
Spindles rotation speed 6.000 r.p.m.
Feeding system: motor kw 4 (hp 5,5) speed m/min 5÷24
Spindles rotation speed 6.000 r.p.m.
Auto Start of Spindles motors
Working spindles
Bottom horizontal grooving head: motor kw 5,5 (hp 7,5) tool diameter capacity mm. 125 ÷ 145 rebating cutter tool
Right vertical: motor kw 5,5 (hp 7,5) tool diameter capacity mm. 115 ÷ 180 vertical adjustment mm. 35
Left vertical: motor kw 5,5 (hp 7,5) tool diameter capacity mm. 115 ÷ 180
Top horizontal: motor kw 5,5 (hp 7,5) tool diameter capacity mm. 115 ÷ 180
Bottom horizontal: motor kw 5,5 (hp 7,5) tool diameter capacity mm. 125 ÷ 145 rebating Universal: motor kw 5,5 (hp 7,5) tool diameter capacity mm. 115 ÷ 180
Set of spacers rings for all spindle
Device for sort pieces
CE mark
- Greece
- uzate
