* dimensions of shelves 220 x 90 cm
* clean, straight, unbent shelves and no dents
* shelf clearance - 50 cm
* 6 pressure pistons with a diameter...
Rip saw machines, Second hand
* working width 190 mm
* working height 120 mm
* vertical heads on one engine with a power of 5.5 kW
* horizontal heads on one engine with a power...
Wide belt sanders, Second hand
* dimensions of shelves 300 x 130 cm
* shelves clean, straight, not bent and no dents, I would say perfect condition
* water-heated shelves with...
Brushing machines, Second hand
Below are some useful information about the feed:
* 3 pull rollers
* forward / reverse rotation
* speed control on the switch and additional...
Presses, Second hand
The basic parameters of this compressor are:
* capacity 6120 l / min at a maximum pressure of 8.5 bar
* main engine power 37 kW (50 HP)
*...
Compressors, New
* working width 11,000 mm
* max working height 160 mm
* 3 grinding aggregates:
- the first steel shaft for calibration with a diameter of 230 mm...
Moulders, Second hand
- saw blade diameter - currently 250 mm, maximum 400 mm
- shaft with a diameter of 30 mm
- disc lowered at an angle, up to 45 degrees
- dial...
Surface planer, Second hand
* belt width 150 mm
* adjustable shoe for sanding veneers on one side and "back" 13x76 cm on the other
* table with an attachment for grinding...
Edge sanding machines, Second hand
* max working width - 300 mm
* max working height - 250 mm
* minimum element length - 250 mm
* 2 brush units with a diameter of 210 mm
- the...
Surface planer, Second hand
* working width 970 mm
* max working height 160 mm
* 2 grinding aggregates
- the first aggregate equipped with two shafts, hard and soft with the...
Surface planer, Second hand
* inner diameter barrel and briquette 70 mm
* 7.5 kW motor
* sawdust tank with a volume of about 0.9 m3 and a diameter of 100 cm
* regulation of...
Sliding table saws, Second hand
* working width 530 mm
* top length 3000 mm
* length of the introductory tabletop 1800 mm
* culaga adjustable at an angle of dim. 175x1500mm
* man...
,
* capacity 984 l / min
* main engine power 7.5 kW
* 500 l tank
* maximum operating pressure 10.0 atm
* built-in refrigerant dryer
* electronic...
Compressors, New
* working width 230 mm
* working height 125 mm
* vertical heads on one engine with a power of 7.5 kW
* horizontal heads on separate motors with a...
Compressors, New
* working width 530 mm * top length 3000 mm * length of the introductory tabletop 1800 mm * culaga adjustable at an angle of dim. 175x1500mm * man...5 000,00,
