Dřevoobráběcí stroje z - MDD Adrian Fusiarz

  • Press ORMA 220x90 cm 6 tłoków
    Stromab TR600
    * dimensions of shelves 220 x 90 cm * clean, straight, unbent shelves and no dents * shelf clearance - 50 cm * 6 pressure pistons with a diameter...
    8500.00 €
    Pila na masiv, použité
    maszynymdd
  • Four side planner SCM Sintex
    CB 2NRT1320
    * working width 190 mm * working height 120 mm * vertical heads on one engine with a power of 5.5 kW * horizontal heads on one engine with a power...
    12500.00 €
    Širokopásová bruska, použité
    maszynymdd
  • Press KOLMAG 300 x 130 cm
    Italmeccanica Profilwood
    * dimensions of shelves 300 x 130 cm * shelves clean, straight, not bent and no dents, I would say perfect condition * water-heated shelves with...
    4500.00 €
    Kartáčovací stroje, použité
    maszynymdd
  • Power feed SCM formula feed 48
    S.Giorgio 350x130
    Below are some useful information about the feed: * 3 pull rollers * forward / reverse rotation * speed control on the switch and additional...
    9500.00 €
    Hydraulické dýhovací lisy, použité
    maszynymdd
  • Compressor Ceccato DRM 50 37 kW
    Ceccato DRM 50
    The basic parameters of this compressor are: * capacity 6120 l / min at a maximum pressure of 8.5 bar * main engine power 37 kW (50 HP) *...
    6000.00 €
    Kompresory, Nové
    maszynymdd
  • Table saw Casolin Astra 5,5 kW
    Paoloni Fimal PF535A
    - saw blade diameter - currently 250 mm, maximum 400 mm - shaft with a diameter of 30 mm - disc lowered at an angle, up to 45 degrees - dial...
    7200.00 €
    Srovnávačky, použité
    maszynymdd
  • Wide belt sanding SCM Sandya 110 CLK3G
    Hemag coroprofil 32
    * working width 11,000 mm * max working height 160 mm * 3 grinding aggregates: - the first steel shaft for calibration with a diameter of 230 mm...
    18000.00 €
    Čtyřstranná frézka, použité
    maszynymdd
  • Edge sanding Samco Unilev15
    Samco Unilev 15
    * belt width 150 mm * adjustable shoe for sanding veneers on one side and "back" 13x76 cm on the other * table with an attachment for grinding...
    1500.00 €
    Hranové profilové brusky, použité
    maszynymdd
  • Brushing machine Olimpia 300 mm 2019 r. like NEW!
    Casolin PF530
    * max working width - 300 mm * max working height - 250 mm * minimum element length - 250 mm * 2 brush units with a diameter of 210 mm - the...
    5000.00 €
    Srovnávačky, použité
    maszynymdd
  • Wide belt sander CB 970 RR+t
    SCM f520 nova
    * working width 970 mm * max working height 160 mm * 2 grinding aggregates - the first aggregate equipped with two shafts, hard and soft with the...
    7200.00 €
    Srovnávačky, použité
    maszynymdd
  • Briquette machine Prodeco E 70 Eco
    Casadei Shark 8pi
    * inner diameter barrel and briquette 70 mm * 7.5 kW motor * sawdust tank with a volume of about 0.9 m3 and a diameter of 100 cm * regulation of...
    4500.00 €
    Formátovací pila - Stolová kotoučová, použité
    maszynymdd
  • Planer PAOLONI Fimal PF530N
    : Paoloni FIMAL_PF530N_Surface planer
    * working width 530 mm * top length 3000 mm * length of the introductory tabletop 1800 mm * culaga adjustable at an angle of dim. 175x1500mm * man...
    5 000,00
    ,
    maszynymdd
  • Compressor Atlas Copco G7FF 500 lt brand new
    Atlas Copco G7FF
    * capacity 984 l / min * main engine power 7.5 kW * 500 l tank * maximum operating pressure 10.0 atm * built-in refrigerant dryer * electronic...
    5200.00 €
    Kompresory, Nové
    maszynymdd
  • Four side planner Weinig Quattromat 23P
    Atlas Copco G5FF
    * working width 230 mm * working height 125 mm * vertical heads on one engine with a power of 7.5 kW * horizontal heads on separate motors with a...
    4500.00 €
    Kompresory, Nové
    maszynymdd