I sell the universal top multiple boring machine with milling for repair works Plug Repair RILESA Rep.-Borem., year 2011.
4 Top drilling spindles
1...
Boring machines, Second hand
I sell the fully equipped edge banding machine BRANDT Optimat KDF 220 C, year 2014:
Configuration:
Entry fence manual adjustable
Premilling...
Edgebanders, Second hand
I sell the fully equipped edge banding machine BRANDT Ambition KDF 650 C, year 2010:
Configuration:
Entry fence manual adjustable
Premilling...
Edgebanders, Second hand
I sell the edge banding machine Holz-Her Streamer 1054 year 2014.
Premilling
Edge banding patron glue
End cutting saws
Tilting radius...
Edgebanders, Second hand
I sell the press for veneer and foil ORMA NPC 6/90 AS-BO.
Product size max. 2500 x 1300mm
Oil heating. Total power 20,5 KW at maximum.
Very good...
Presses, Second hand
I sell the widebelt sanding machine SCM Sandya 3 RCS 95, year 2000.
Configuration:
Steel cylinder
Combi unit rubber cylinder +...
Wide belt sanders, Second hand
I sell the format sliding table saw with scoring SCM SI 300N, year 2000.
Sliding table length 3200mm.
Max. cutting width on cross fence 1950 /...
Sliding table saws, Second hand
I sell the horizontal wood shredder DI Mechanik SDOP 400/3,
Made in Slovakia
Year 2004
Cylinder system with 3 knives.
400x150mm input in...
Wood shredders, Second hand
I sell the wood shredder LAIMET LS-21/E,
Year 2017
Spiral system, very quiet.
315x210mm input in the shredder
Motor 30KW
Leistung Zirka...
Wood shredders, Second hand
I sell the 4-lamp UV-drying tunnel Cefla UV-R M4/3500
Year 2011
Working width 1400mm.
Total length 3,70m
Total power 71,55 kW
Very good...
Wood finishing equipment, Second hand
I sell the 2-head 2-lamp UV-drying tunnel Cefla TLE/B/2+TTE 2500
Year 2002
Working width 1400mm.
Total length 2,50m
2 Lamps HG 120 W + HG 120 W...
Wood finishing equipment, Second hand
I sell the 1-cylinder roller coater BURKLE SAL.
Working width 1300mm
Very good condition. Fully working.
Available immediately.
Wood finishing equipment, Second hand
I sell the 1-cylinder roller coater BURKLE SAS1300.
Working width 1300mm
Very good condition. Fully working.
Available immediately.
Wood finishing equipment, Second hand
I sell the press for veneer and foil ORMA NPC.
Product size max. 3500 x 1300mm
Water heating. Total power 21,2 KW at maximum.
Very good...
Presses, Second hand
I sell the screw compressor with air dryer:
AIRKRONE 25 SS.
Motor power 18,5 KW / 25 HP
174 m3 / hr. / 2900 l/min.
Year 1997. Apprx. 20.000...
Compressors, Second hand
I sell the new double end tenoning machine for floor production FRIULMAC FLOORMAT C NEW,
Year 2009.
Working width 160 - 1300 mm
Working...
Tenoning machines, New
I sell the band conveyor suitable for Industry use, for example wooden industry, material manipulation etc.
Total length 3,40m
Band width...
Lifting tables, Second hand
I sell the Finnrose bar conveyor suitable for Industry use, for example wooden industry, material manipulation etc.
Total length 4,20m
Band...
Lifting tables, Second hand
I sell the set of 3pcs. Grecon Dimter belt conveyor suitable for Industry use, for example wooden industry, material manipulation etc.
Total...
Lifting tables, Second hand
I sell the band conveyor suitable for Industry use, for example wooden industry, material manipulation etc.
Total length 2,90m
Band width...
Lifting tables, Second hand
I sell the bar conveyor suitable for Industry use, for example wooden industry, material manipulation etc.
Brand: CEFLA
Model: TR3000/...
Lifting tables, Second hand
I sell the roller conveyor Energo-Kov suitable for Industry use, for example wooden industry, material manipulation etc.
Total length 2 x 2,...
Lifting tables, Second hand
I sell the throughfeed drilling machine with dowel inserting Rilesa VLGD 2224,
Year 2009.
Working width up to 2200mm
Configuration:
1+1...
Boring and inserting machines, Second hand
I sell the throughfeed drilling machine Rilesa Rapid 1500, Year 2012.
Working width up to 1500mm
Configuration:
RAPID 2200:
1+1 motors from...
Boring and inserting machines, Second hand
I sell the fourside moulder Weinig POWERMAT 1000, year 2008
Feeding device Grasten Maskinservice
Working width 320mm
Working height 130mm
8...
Moulders, Second hand
I sell the double mitre saw without scoring throughfeed COMEC TD2400 + CA.
Working width 250 to 2400mm.
Max. saw profile 80 x 100mm
Angular...
Crosscut saws, Second hand
I sell the widebelt sanding machine COSTA K CCC 1350, year 2004.
Configuration:
55 KW steel calibration cylinder
45 KW hard rubber...
Wide belt sanders, Second hand
I sell the CNC drilling machine with inserting BIESSE COMIL INSIDER KT2. Year 2002.
2 pcs. CNC drilling heads from top.
1 pcs. Grooving saw
2 pcs...
Boring and inserting machines, Second hand
I sell the CNC drilling machine with inserting BIESSE COMIL INSIDER KTC. Year 2002.
2 pcs. CNC drilling heads from top.
1 pcs. Glue spraying head...
Boring and inserting machines, Second hand
I sell the CNC accessories inserting machine with glue spraying BIESSE COMIL INSIDER IT2G. Year 2001.
2 Stk. CNC drawers slidings inserting from top...
Boring and inserting machines, Second hand
I sell the CNC drilling machine with inserting BIESSE COMIL INSIDER KT2. Year 1999.
2 pcs. CNC drilling heads from top.
1 pcs. Grooving saw
3 pcs...
Boring and inserting machines, Second hand
I sell the side glue spreader Fischer Ruckle FLA,
Year 1994.
Suitable for solid wood glulam boards production.
Throughfeed with...
Glue spreaders, Second hand
I sell the widebelt sanding machine VIET TARGET 321B 1100, year 1996.
Configuration:
Steel cylinder
Hard rubber cylinder
Soft...
Wide belt sanders, Second hand
I sell the wooden window assembly table OMGA BA825 (+A+U).
Year 2012
All complete. Very good condition.
Available immediately.
Assembly benches for windows and doors, Second hand
I sell the throughfeed drilling machine with HOMAG BST440/30/D.
Year 1997
Configuration:
4+4 motors from under
1+1 motors from sides per 24...
Boring machines, Second hand
I sell the automatic drilling machine KUSING.
Working width up to 1200mm
Magazine for elements
Configuration:
1+1 motors from sides
Atypic 2-...
Boring machines, Second hand
I sell the complete set of machines for production of wooden dowels.
Year: 1993 - 2008
Brusa di Garboli TA30
L.Loser AA200
Moulders
Cutting...
Profiling machines, Second hand
I sell the semi-automatic finger joint line GOMA.
Year 2006.
Input length 180-1.000mm
Input width 20-160mm / 610mm in 1 step
Input...
Tenoning machines, Second hand
I sell the fourside moulder Weinig POWERMAT 2400, year 2013
Feeding speed 8-80 m/min. - 15KW (20HP)
Working width 370mm
Working height 130mm
5...
Four sided planers, Second hand
I sell the automatic optimising saw GreCon Dimter 2004, year 1992.
Input table automatic feeding / throughfeed system
Outut table
3 pcs....
Crosscut saws, Second hand
I sell the double mitre saw OMGA TR2A.
Cutting length 390 - 3000mm
Cutting width max. 170mm
Cutting height max. 90mm
Tilting heads 0 + - 45...
Crosscut saws, Second hand
We sell this industrial Rip Saw/Edge saw to operations with a requirement for large-scale processing of lumber.
The machine is suitable for...
Rip saw machines, New
I will sell this middle category of Rip saw / Edge saw KUSING RP-OP-600 3.0.
It is a machine suitable for smaller operations processing primarily...
Rip saw machines, New
It is a profesional saw with one or two simultaneously digitally adjustable saw blades.
The control has a memory with 5 values for faster and...
Rip saw machines, New
I sell the automatic finger joint line SMB Maschinenbau.
Input width 20-200mm
Input thickness 20-120mm
Automatic finger joint unit with...
Tenoning machines, Second hand
I sell the double end cutting and tenoning machine SCM CONCEPT NT.
Working width up to 3000mm
Configuration left side / fix:
1 pc. cutting saw...
Tenoning machines, Second hand
I sell the panel beam saw GABBIANI MACCHINE
Cutting length 4600mm.
Back loading table.
Cutting height 90mm (at 350mm saw blade)....
Beam saws, Second hand
Professional spindle moulder with iron table and tilting and tenoning KUSING SFnc3.
Technical parameters:
Main engine power: 3 kW (4 HP)
Spindle...
Spindle moulding machines, New
Professional spindle moulder with aluminum sliding table and tilting KUSING SFna 1200.
Technical parameters:
Main engine power: 3 kW (4 HP)...
Spindle moulding machines, New
I sell the new brushing machine Kusing K4-150/200L X.
Working width 200mm
Working height 150mm
4 working heads per 1,5 kW.
Feeding motor 0,...
Brushing machines, New
I sell the new brushing machine Kusing K4-150/100S.
Working width 150mm
Working height 100mm
4 working heads per 1,5 kW.
Feeding motor 0,55...
Brushing machines, New
Small 4 side brushing / grinding machine for small pieces.
Minimum part length 250 mm !
TECHNICAL SPECIFICATIONS:
Feed belt speed: 3-20 m/min...
Brushing machines, New
New KUSING four-sided brush / grinder made in Europe.
Compact machine with quick adjustment and optional parameters.
Technical parameters:...
Brushing machines, New
Small compact miltirip saw machine KUSING RP - 200.
Technical parameters:
Main engine power : 7,5 / 11 kW
Shaft diameter : 30 mm
Shaft length...
Multi rip saws, New
