I sell the 2-head UV-drying tunnel Superfici Essiccatoio UV
Model: Poliedra S.Cure 1650x2 + TT1 3500.
Year 2015.
Available immediately.
Repairs...
Wood finishing equipment, Second hand
I sell the edge banding machine IMA HKA.
Suitable for curved shaped edges
Good condition, possible to test !
Edgebanders, Second hand
New brushing machine K2L-400+ with manual stroke control.
The stroke of both spindles simultaneously with the adjustment of the individual...
Brushing machines, New
I sell the pneumatic end cutting saw Stromab TR350, year 2016.
Motor power 3,0kW
Saw blade diameter fi.350x30mm
Cutting schema ver.1 max. 150x80mm...
Crosscut saws, Second hand
I sell the screw compressor:
Schneider AirMaster AMK 11.10
Motor - 11kW,
Power - 1,500 l/min.,
Pressed air max.10 bar
Year...
Compressors, Second hand
I sell the screw compressor:
MARK MSB 30/10
Motor - 30kW,
Power - 3540 l/min., 212 m3/hr.
Pressed air max.10 bar
Year 2015. ...
Compressors, Second hand
I sell the multiple boring machine SCM TOP 35,
Year 2004.
Number of spindles 35
Offset 32mm
6 positions for pre-set drilling depths
2...
Boring machines, Second hand
I sell the edge banding machine BIESSE Akron 425 A-R
Year 2009
Configuration:
Edge height 8 - 65 mm
Edge thickness 0,4 - 8 (12) mm
Edge...
Edgebanders, Second hand
I sell the thicknessing machine VITAL DMS 41.
New machine year 2023.
Max. working width 410mm
Max. working height 230mm
Max. construction...
Thicknessing planers, New
I sell the 2-cylinder roller coater Superfici Elmag FVR.
Working width 1400mm
Very good condition. Fully working.
Available immediately.
Wood finishing equipment, Second hand
I sell the flader orbital brushing machine.
Model Quickwood Fladder
Working width 1060mm
Mechanically adjustable rotation and feeding speed...
Brushing machines, Second hand
I sell the thicknessing machine VITAL DMS 53.
New machine year 2023.
Max. working width 530mm
Max. working height 300mm
Max. construction...
Thicknessing planers, New
I sell the thin cutting mini frame saw gatter NEVA TR88 Orbit plus, year 2005.
Configuration with top + bottom moulding heads 1,5 + 1,5 KW suitable...
Multi rip saws, Second hand
I sell the thicknessing machine VITAL DMS 63.
New machine year 2023.
Max. working width 630mm
Max. working height 300mm
Max. construction...
Thicknessing planers, New
I sell the wood drying klins NARDI for 30m3 wood.
Control panel Nardi, one spare computer additional.
Volume netto wood 25-30 m3.
4 ventilator...
Hot air generators, Second hand
I sell the widebelt sanding machine RWT BS950RP, year 2009.
Configuration:
Hard rubber cylinder
Combi unit soft rubber cylinder +...
Wide belt sanders, Second hand
I sell the widebelt sanding machine Costa A CT 1150, year 2000.
Configuration hard rubber cylinder - electronic segmented pad.
Working width 1150mm...
Wide belt sanders, Second hand
I sell the panel beam saw GIBEN ONIX SPT CHALLENGE LINE
Cutting size 3800x5400mm.
Back loading table 3800x1600mm.
Cutting height 90mm...
Beam saws, Second hand
I sell the horizontal drilling aggregate for edges suitable for CNC working centres with edge banding HOMAG, WEEKE, BIESSE, SCM, MORBIDELLI,...
Miscellaneous, New
I sell the vertical band saw Dumbo with the sharpening and welding machine Battilani Modena.
Condition very good.
Available immediately.
Band saws, Second hand
I sell the turning device HOMAG TD31/25/13.
Year 1990.
One side feeding suitable for line.
Element width 1250 + 1250mm
Total length 6500mm...
Stacking device, Second hand
I sell the press for glulam glued massive wood LISY DVORAK TH6, year 2008.
Material size 3000 X 1250 x 50mm
6 working areas, manual rotation...
Presses, Second hand
I sell the widebelt sanding machine SGJ 1300R-RP.
Year 2008
Configuration:
steel cylinder / motor 37 KW
combi unit rubber cylinder...
Wide belt sanders, Second hand
I sell the turning device HOMAG TD41/25/13.
Year 1990.
One side feeding suitable for line.
Element width 1250 + 1250mm
Total length 4500mm...
Stacking device, Second hand
I sell the 3-axis CNC working centre HOLZ-HER UNI-MASTER 7226 with beam table
Year 2004.
Configuration:
3-axis main spindle recently full...
Machining centers, Second hand
I sell the vertical band saw Centauro 1000ST.
Motor power 7,5KW
Condition very good.
Available immediately.
Band saws, Second hand
I sell the edge banding machine Biesse Akron 1320
Year 2012.
Configuration:
Entry fence manual adjustable
Premilling manual adjustable
Edge...
Edgebanders, Second hand
I sell the middle cut throughfeed saw HOMAG FPL620/06/15/P S/LQ.
Year 2007.
Working width 204 - 1304mm
Working thickness 12 - 60mm
Cutting...
Beam saws, Second hand
I sell the pneumatic end cutting saw Mebor CEL-700 P, year 2006.
Motor power 4,0kW
Saw blade diameter fi.450x30mm
Cutting schema max. 700x100mm...
Crosscut saws, Second hand
I sell the throughfeed drilling machine with BIESSE TECHNO FDT.
Year 2004
Working area:
X: 215 - 32.000 mm
Y: max. 672 mm (...
Boring machines, Second hand
I sell the small profi fourside moulder Weinig 101 IV, year 1958.
Feeding speeds 2- 4 - 6 - 12 m/min. Holz-Her Feeder 0,7KW
Working width 110mm...
Four sided planers, Second hand
I sell the 1-cylinder roller coater BURKLE SAL1300.
Working width 1300mm
Very good condition. Fully working.
Available immediately.
Wood finishing equipment, Second hand
I sell the edge banding machine Biesse Akron 1330A
Year 2017.
Configuration:
Entry fence manual adjustable
Premilling manual adjustable...
Edgebanders, Second hand
I sell the new brushing machine Kusing K1-400 S.
Working width 400mm
Working height n/a (or limited by feeder height)
1 working head 3 kW (...
Brushing machines, New
I sell the panel beam saw SCM Sigma Prima 67. Year 2010.
Cutting size 3300x3200mm.
Cutting height 67mm.
Max saw blade diameters 320 + 160mm
Main...
Beam saws, Second hand
New VDL 2D mortiser with the possibility of automatic drilling at 25 and 32 intervals with the possibility of tilting and rotating in 2 directions...
Mortising machines, New
Professional formatting saw for solid wood with tilt.
Technical parameters:
Maximum saw blade diameter: ø 400/30 mm
Main engine power: 3 kW (can...
Sliding table saws, New
New brushing machine KUSING K2Le-400
Working width 400mm
Working height up to 310mm (with brushes dia.250mm)
2 working heads 2x 4kw
Feeding...
Brushing machines, New
I sell the new brushing machine Kusing K2-400 S.
Working width 400mm
Working height n/a (or limited by feeder height)
2 working heads 3+3 kW...
Brushing machines, New
Heavy formatting saw KUSING ATLAS 3200 with manual control. Cast iron core with lifting of aggregates by means of dovetail guides. This core is...
Sliding table saws, New
I sell the 2-head 4-lamp UV-drying tunnel Cefla Ecolight TLF/BB/4+TTE 4000
Year 2001
Working width 1400mm.
Total length 4,00m
Total power 74,3 kW...
Wood finishing equipment, Second hand
Je vends la plaqueuse de chants entièrement équipée BRANDT Ambition Highflex 1430, année 2011 :
Configuration:
Clôture d'entrée servomoteur...
Edgebanders, Second hand
Je vends la scie à bout pneumatique Stromab TR350, année 2010.
Puissance moteur 3kW
Diamètre lame de scie fi.350x30mm
Schéma de coupe ver.1 max....
Crosscut saws, Second hand
Je vends le centre d'usinage CNC 4 axes Biesse Rover C 6.50 CONF.1 avec table à faisceau, année 2007.
Configuration:
Broche principale 4 axes HSD...
Machining centers, Second hand
Prodám soustruh WEMA CNC CONQUEST,
Rok 2012
Včetně zásobníku pro automatické podávání prvků
Včetně brusné jednotky
Stav velmi dobrý. Ihned k...
Woodturning lathes, Second hand
Je vends la scie radiale manuelle MAGGI BEST 960S, année 2009.
Inclinaison lame de scie 3 axes :
Verticale +-90°
Radiale horizontale +-90°...
Radial arm saws, Second hand
Sprzedaję przelotową wiertarko-rowkarkę CNC SCM CYFLEX H810, rok 2013.
Szerokość robocza do 860mm
Konfiguracja:
8 + 4 + 2 szt. jednostki...
Machining centers, Second hand
Prodám multiripovací pilu italské výroby SCM M2.
Výška řezu pod ostřím 120mm / možnost nastavení
Šířka řezu na podávacím pásu max. 220 mm....
Multi rip saws, Second hand
Ich verkaufe die Plattenbalkensäge Paoloni Fimal Concept 350. Baujahr 2016.
Schnittlänge 3200 mm.
Schnitthöhe 95 mm.
Sägeblattneigung 0-45°...
Beam saws, Second hand
Sprzedam prasę do klejonych płyt z litego drewna litego ORMA FUTURA/ECO 30/17
Rozmiar materiału 3000X1700x150mm
2 szt. tłoki pionowe.
Masa własna...
Clamping machines, Second hand
Prodám automatickou pneumatickou koncovou rozbrušovací pilu Stromab TR500 MATRIX 4, rv 2005.
Výkon motoru 7,5kW
Průměr pilového kotouče fi.500x30mm...
Crosscut saws, Second hand
Prodám širokopásovou brusku BOERE TKS 1300.
Konfigurace:
95 Sh válec / motor z tvrdé pryže 18,5 kW
Pneumatická nastavitelná podložka / motor 15...
Wide belt sanders, Second hand
Prodám průchozí dvojitou pokosovou pilu s bodováním OMGA TI2500 Super, rok 2003.
Motor 5kW na každé straně pro hlavní pilový kotouč a předřezávací...
Crosscut saws, Second hand
Je vends la machine à affûter les couteaux VEB Maschinenfabrik MACO HSA800, Made in Germany.
Longueur de travail 800 mm
Alimentation et pas...
Grinding machines, Second hand
