Beam cutting center Hundegger K2 c.e.

flexible and efficient processing of construction timber without measurements, markings and preparation times: thanks to the new K2-Industry, all this is possible for those wood carpentry companies looking for maximum productivity and availability in all sectors, from carpentry cutting to tree trunk constructions. Whether for single or series processing, the new K2-Industry always offers maximum availability and speed. Preparation times are just a distant memory. The machine is capable of carrying out any type of work: from conservatories with small cross-sections up to glulam and multilayer plywood elements of 300 x 1,300 mm. For example, the K2-Industry is also able to process and transport round timbers, log construction profiles, T-profiles or multiple layers without adaptation.

The saw group Optimized log ejection for faster sawing processes When developing the new K2-Industry, every component was put to the test in terms of maximum productivity and efficiency. This also applies to the saw unit, which now offers 13 kW of power at 1,500 rpm and stands out thanks to an optimized stump disposal system. In combination with a suitable support table, an open saw table and the intelligent CAMBIUM software, any product idea can be rationally implemented. Precise and fully automatic rafter cuts, asymmetrical cuts, tapering and miter cuts From every angle, with every slope and for any length Fairings, burrs and grooves possible with any length Grooves of the support boards in any width and from any angle The support table is made of durable plastic and offers optimal sliding properties. In this way, abrasions on the wood are avoided and maximum machining precision is guaranteed thanks to the sliding friction reduced to a minimum. The half-open saw table demonstrates its strengths right from the first cut. Depending on the size, it is now practically no longer necessary to use a log ejector, which represents a significant time-saver during processing. Best of all, CAMBIUM is able to automatically determine if a log is passing through the opening. If the dimensions are too large, the rotation of the saw creates a support and in this way the log can be ejected.