VACUUM LOADING DEVICE WITH 1 COLUMN FOR CURSAL AUTOMATIC PUSH FEED CROSS CUT SAW

работа: 
Cursal
модель: 
Cv 1c 50k 2e vacuum loading device with 1 column for cursal automatic push feed cross cut saw
Описание: 

Visible in Cursal, combined with Cursal push feed saws series TRSI AP-OL of different modular sizes.
Suitable for loading packing boards (loading single boards and parcels).
Cost on request.

Automatic loading device with 2 vacuum bodies to lift 1 or 2 boards which will be placed on a transfer in fixed position.
Handlings by means of variable-speed motors.
Articulated vacuum bodies with 20 < 80 independent chambers for vacuum by means of self-excluding valves, rubbers with uni-directional cells, dimensions of the surface from 1000 x 150 to 1300 x 250 mm.
Vacuum generated by amplifier ejectors with variable capacity.
Capacity 50 kg for handled layer.
Overhanging monoblock structure with steel frame; it is welded and worked on the seats of the guides.
Linear guideway with rolling recirculation system.
Length of the boards minimum 2000 - maximum 3000 mm.
Width of the boards minimum 65 - maximum 400 mm.
Thickness of the boards: minimum 15 - maximum 100 mm.
The boards must have a constant cross-cut section (square or rectangular one) with the main side positioned in the bottom.
The boards must be straight with constant widths.
The boards must be clean, not wet, not frozen and placed in the centre, one for row in plane, maximum 30 mm. difference of level.
Device to remove the separator sticks not included.
Necessary protections separately quoted considering the risk analysis.
Perimetrical protection in net mesh 40 x 40 mm, wire Ø 4 mm, columns 60 x 60 - H 2000 mm pitch 1225 mm.
Front protection with optical barriers
Installed peak power 4 KW.
Compressed air consumption per loading cycle (10 secs) 65 nl for every vacuum body, minimum pressure 7 bar . Valid up to 1000 meters of height

Год: 
2020
CV1C - Automatic vacuum feeder for Cursal push system saws-Cursal_woodworking_221
TRSI AP Ø500 - Push feed automatic cross-cut-saw_loading vacuum in UK-Cursal_woodworking_210

Контакты

Связаться с продавцом

CAPTCHA
Пожалуйста, подтвердите, что вы не робот. Чтобы предотвратить автоматическую отправку спама.

Вертикальные вкладки