Double moulding edgebanding BIESSE STREAM SB2 10.5

Double moulding edgebanding BIESSE STREAM SB2 10.5

BIESSE
Ref: C3086

Technical characteristics
Panel width : 240 mm to 1200 mm
Panel length : 240 mm to 3000 mm
Panel thickness : 10 mm to 60 mm
Band thickness : 0,3 mm to 3 mm
Pin inner axis : 500 mm

ENTRY / EXIT :

Transfer realised with special chains covered in stainless long lasting rubber
Entry pivoting guides adjustable depending on panel type
Closing device on above pressor to assure the pressing of the panel against the pins

Delaying device in entry for optimization of different width panel dimensions
Single part rigid structural longitudinal chassis

ADVANCE CHAIN :
Continuous speed tuning from 10 to 40 m/min by INVERTER CN direct numerical command
The stop pins are automatically adjusted in height by CN and can have : height/thickness 12- 18-23 mm from the chain level

Chain pin inner axis 500 mm

BELT PRESSOR

SOUNDPROOF CABINS

All machining groups inside the machine are surrounded by soundproof material Internal lighting

CN command placed at entry of the machine, fixed chassis side

NUMERICAL CONTROL

Video interface
Positioning axis control
Chain advance speed tuning
Pressor height adjusting depending on panel thickness Automatic adjustment of band changing and band charger Moulding list management
Sequenced motor startup
Possibility of connection to a barcode reader
Module NC410

MILLING GROUP

Timed pneumatical anti shard action for transversal milling Tool rotation speed : 6000 rpm
Motor power : 5.8 kW
Tool Ø : 200 mm

DOUBLE SUPERPOSED SPLINTERS

Simultaneous displacement for thickness adjustment and independent adjustment vertical and horizontal
Cast iron bearing structure
Tool speed rotation : 6000 rpm

Motor power : 5.8 kW Tool Ø : 205 to 250 mm

EXTENSION MACHINE to 3200 mm

AUTOMATIC CENTRAL SUPPORT 10.5

This device allows support of parts that due to their dimensions or thickness can subdue central bending
Fully automatic activation

GLUING GROUP SP3

Straight bands in resin, melamine, ABS, PVC, PP EVA basis thermoplastic glue
Independent Teflon covered changeable glue tank Glue level sensor inside the tank

Glue input roller speed synchronized with the chain advance Breveted pre fusion device
Glue granule container (8kg)
Band presence detection device

Automatic band changing procedure

6 POSITION MOBILE BAND CHARGERS

END CUTTING

End cutting unit for edge thicknesses up to 3 mm
Device for quick removal in stroke
Automatic exclusion of the unit when the motors are stopped
Speed : 12000 rpm
Panel projection : 35 mm
Edge thickness : 0.3 to 3 mm
Panel thickness : 10 to 60 mm
Interval between 2 consecutive panels : 350 mm

WHOLESALE TRIMMING UNIT

2 superimposed motors with horizontal axis
Automatic pneumatic exclusion of the group
Speed : 12000 rpm
Motor power : 1.3 + 1.3 kw
Panel thickness : 10 to 60 mm
Tool diameter : 80 mm

ANGLE TRIMMING GROUP

The adjustment of the position of the tool in relation to the material is automatic with predefined dimensions on 4 pre-adjustable in-line stops
The in-line stops are automatically selected by the control
Use on the MULTIPROFIL tool group to change profile/shape without replacing the tool
Tools are equipped with 20° chamfer and 1.5-2-3 mm radius
Speed : 12000 rpm
Motor power : 0.65 + 0.65 kw
Panel thickness : 10 to 60 mm

TOP / BOTTOM ROUNDING GROUP

Rounding copier for the upper and lower stops of the panel with oscillating movement for the continuation of the panel
Quick release system of the motor-holder groups
Automatic exclusion of the tool with stopped motors
Tool rotation speed : 12000 rpm
Motor power : 0.3 kw
Edge thickness : 0.3 to 3 mm
Radius with concave profile : 40 mm
Minimum distance between the tail of one panel and the head of the next (at 20m/min) : 500 mm

UNIVERSAL MILLING MACHINE

For the execution of profiles, grooves and rebates on the edge and on the plane of the panels with pneumatic intervention
Motor tiltable from 0 to 90° manually
Automatic exclusion group from the control panel
Speed : 12000 rpm
Motor power : 5 kw
Tool diameter : 125 mm

DOUBLE UNIVERSAL MILLING MACHINE

For the execution of grooves and rebates on the edge and on the plane of the panels with pneumatic intervention
The upper motor is manually adjustable from 0 to 90°.
The lower motor is fixed horizontal
Automatic exclusion of the groups from the control panel
Speed : 12000 rpm
Motor power : 5+5 kw
Tool diameter : 125 mm

EDGE SCRAPING UNIT

For the finishing of ABS/PVC/PP edges of high thickness with radial tools and horizontal and vertical copiers
Equipped with nebulizer for tool cleaning
Automatic exclusion from the control panel
Tool radius: 1 to 5 mm

EDGE HEATER

Allows to heat the edge of the panel during the passage of the latter to reactivate the original color when using PVC materials

GLUE SCRAPING UNIT

EDGE-CONTROL DEVICE

Electronic-mechanical device for the control of the edge length by means of shears at 40m/min

Minimum length of the edge to be applied: 350 mm

BAR FOR NARROW PIECES SB

Minimum width of panels: 35 mm

KIT FOR NARROW PIECES WITH THIN EDGES

It allows to work pieces with minimum width 70 mm, only in case of thin edge application
Minimum panel length 400 mm

PREDISPOSITION FOR INSTALLATION KIT PU GLUING