Techna 3001 plus - automatic double mitre saws

Techna 3001 plus - automatic double mitre saws - radially cutting syste - boring units - head units rotation up to 45°

Machine designed for cutting and boring, under an high precision and great productivity: frames furniture - cornices - profils - kitchen cabinet doors both in solid wood, both in mdf laminated, veneer etc.

STANDARS EQUIPMENT

Mobile head cutting unit with motorized positioning by gear motor and electronic digital display Units. The sliding movement is made on tempered guides and ball recirculation racks.
NR.2 cutting units with blade of Ø 400 - Each unit is driven by: a motor of Kw 3; Horizontal sliding (radial system) on rolling slide units.
NR.2 support tables pieces supplied with pneumatic vertical clamps.
NR.1 intermediate support table.
Angle degrees reading by electronic digital display.
Blades detachment after cutting.
NR.2 boring units supplied with heads at: 5 mandrils interaxe of 32 mm; Motors of Kw 1,5 (r.p.m. 5500); Sliding movement on rolling slide units; Mechanical reader for vertical and horizontal adjustements; The boring heads are orientable whether horizontaly or vertically.
Start cycle by push buttons by two hands (as per Safety Regulations) and for pneumatic clamps control by pedal.
Automatic waste evacuation.

TECHNICAL DATA

Max. Height of the cut mm 145.
Max width of the cut: mm 300 (with blades at 90°). mm 210 (with blades at 45°).

Minim. length of the cut mm 170 (with automatic loading/unloading fitted mm 355).
Max. length of the cut mm 3100.
Machine executed according to CE rules, included the protection grille on three sides.

OPTIONAL

NR.2 Scoring saw Units Kw 0,55.
NR.2 frontal clamps.
Cutting length of mm 4100.
Programmable positioning device at 1 Axis for automatic length adjustment.
Programmable electronic device at 3 Axis for: Length adjustment; Left cutting angle adjustment; Right cutting angle adjustment.
Automatic system for cutting and boring both long bars without pre-cut. (its use obstructs the contemporary work of the loading/unloading unit)
Extra charge for cut height at 160 (with blade ø 450 mm).
Loading/Unloading automatic system with automatic loading/unloading in working pleaseconsider: min.cut length 355 mm; max.cut height 50 mm; min.cut height 10 mm; max.cut large 160 mm; min.cut large 30 mm.
NR.2 additional milling/shaping heads with pneumatic sliding carriage. (their use obstruct the contemporary work of the boring units)
Rotation system of the units for frontal boring. (impossible to utilize with the loading/unloading unit fitted)
Additional group to perforate with head to 3 mandrels int.32, frontal. (unusable with the automatic loader / unloader, climbed on)
Extra down boring unit with 5 spindles head.
Combined blade+cutter unit for door crosspiece tenoning. (suitable for post joint assembly)