STANDARD EQUIPMENT
Strong frame consisting of onefixed shoulder and one mobile shoulder as per the different widths of the processing panels.
The sliding movementis made on ontempered guides and balls recirculation racks.
Brushelss Motors controlled by CN, ensure rapid shifts.
Conveyor belts and reference fold-aways ystems (left and Right) ensure the full automation.
Adjustable clamps for locking the panel.
Mobile shoulder: Horizontal Milling for the loging of the locks - Motor Kw 3,3 g/m 18000; Vertical milling for the hole of the key and of the handle - Motor Kw 3,3 g/m 18000.
Fixeds houlder: 1,5 for Horizontal milling for fold-awayhinges, knobs, and other kinds of hinges - motor Kw 3,3 g/m 18000; One Anuba/hinge head electronic unit with controller inclination -5° +90° - motors: Kw 0,75 for screwing drilling and 1,5 Kw for the boring.
Sliding movements on the axes X Y Z made on ontempered guides and balls recirculation racks and runned by electronic control.
IN: Motorized roller unit - OUT: neutral roller unit.
CN with touch-screen: Management Software with an easy graphic interface and the macros for the standard processings.
Machine executed according to the CE rules including perimetral fence with panels.
TECHNICAL DATA
Max. length of the door 2.500 mm.
Max. width of the door 1.200 mm.
Min. width of the door 600 mm.
Machine executed according to CE rules.
OPTIONAL
Milling unit controlled inclination.
Electrical spindle with rapid change of the tools with pneumatic system.
Electrical spindle at KW 5,6 - ER 32.
Double loading for Anuba hinge unit.
Complete kid for extra anuba hinge.
Kit for double-leg Anuba hinges. (suitable in the case that you utilize both the anuba with 1 leg both the hinges anuba with double-leg)
Kit for double-leg Anuba hinges. (suitable in the case that you utilize the anuba with double leg only)
- Italy
- New
