ROLL MATERIAL FOR STRAIGHT EDGES MM 0.4-3
EDGESTRIPS THICKNESS MM 0.4-10
PANEL THCKNESS MM 10-60
VARIABLE FEED SPEED 10-25 MT/MIN
VOLTAGE: 400V/50HZ with Neutral EU
(Total Machine length mm 8500)
Description:
- Single sided edgebander with LH infeed fence
- Bottom feed track riding on Round/flat guides
- Top pressure beam with single drive and clutch guided by spring loaded rods to guarantee perfect feed of panels through the working Units.
- Automatic lifting of Top pressure beam
- Top working units connected to top pressure beam for simultaneous height adjustment
- The electric control cabinet is located at front of machine
TECHNICAL DATA
Panel dimensions:
Thickness mm 10-60
Min. panel Width
- Standard straight panel mm 90
- With corner rounding and
Radius scraper mm 95
EXECUTION ACCORDING TO CE RULES
In accordance with Ce rules, 89/392 machines directive.
SOUNDPROOF CABINET
LH-INFEED SIDE FENCE - 2 POSITIONS FROM PLC
- with double pneumatic stop 0.4-3mm
SPRAY ANTI-ADHESIVE UNIT 'AAR'
To avoid deposits of glue on the top and bottom surface of the panel.
Complete with 2 spray-guns fed by two anti-adhesive liquid containers.
PRE-MILLING UNIT KW 4 (5 hp)
Motor power kW 4+4
AIR BLOWERS FOR CLEANING OF PANELS
GLUING UNIT FOR STRAIGHT PROCESSING
For the gluing of straight edges in coils and in strips
with hot melted glue applied to panel edgel:
- quick melt system
- Quick interchangeable glue pot
- control of the glue temperature on glue pot and on premelt system
- Edge presence control
- exhaust hood for fumes
- Guillotine shears for tape cut (max 3mm thick X 45)
- automatic system of edges loading for material in coils and strips which allows to change the types of applied edges in a short time
- pressure zone with pneumatic independent adjustment of the pressure with Siko mechanical readout.
Glue pot capacity kg 1,2
Glue melting capacity with pre-melting system kg/h 8
COIL MAGAZINE (MAX. H=65)
Feeding edges system with single station for automatic infeed for material in coil combines with pre-cut strips feeding table:
- Roll diameter mm 800
END CUTTING UNIT YU/1000 - KW 0,35
For the removal of the exceeding edge from the top and bottom of the panel:
- motors with manual inclination up to 15°
- automatic cut-off.
Motors power kW 0,35+0,35
Tools installed nr.2 blades Ø 150 mm
TOP & BOTTOM ROUGH TRIMMING UNIT R KW 1.8 (2.5 hp)
For the rough trimming of thin and medium edges or for the finishing of the solid wood edge:
Motors power kW 1+1 – Rpm 12,000
TOP & BOTTOM FINE/RADIUS TRIMMING UNIT RSU KW 0,5
For the finishing of thin edges or wood or for the rough trimming of the radius on PVC/ABS edges:
- two motors inclinable up to 30° with quick-release system
- top motor connected to the pressure beam for the automatic adjustment according to the edge thickness
Motors power kw 0,5+0,5 - Rpm 12,000
CORNER ROUNDING UNIT C1+C2.
To carry out the front and back rounding on the transversal side of shaped panels or on PVC/ABS edges and thin solid wood with a very high degree of finishing:
- four motors provided with quick-release motor
- copying system with bearing feelers and lateral feeler;
- Double pneumatic stop for tape or thick PVC/ABS .
- automatic on/off.
Motors Power kW 0,35x4 Rpm 12,000
Max. speed track feed m/min 22
UNIVERSAL GROOVING/MILLING UNIT ‘’U’’ – 5.5 HP
Univeral grooving unit for profiling/grooving on top/bottom or side of panel ,
For stop or continuos grooves
- Spindle rotation LH/RH by selector located on control panel
- Pneumatic jump IN/OUT in both horizontal or vertical position
- Motor HP 5,5 – 12000 rpm
WITHOUT TOOLS
GLUE SCRAPER UNIT RCA/2C
It eliminates possible excess of glue on the top and bottom side of the panel:
- completed with two cutter-tools of Widia;
RADIUS SCRAPER UNIT RCS
For the finishing of radiararized PVC/ABS edges:
- quick-release device made of a tool-holder block + tool which allows the fast and precise interchangeability of the tool;
- vertical and horizontal shifting devices made of steel grounded bars with recirculating ball bearings;
TILTABLE OSCILLATE BRUSHING UNIT SP/F
For the cleaning and finishing (shining) of plastic edges:
- two overlapped motors manually inclinable completed with two cloth brushes;
- top motor connected to the pressure beam for the automatic adjustment according to the thickness panel;
- manual cut-off.
Motors power kW 0,29+0,29 – Rpm 1500
Max. inclination 30°
Brushes dimension mm 150x50x33
TOP & BOTTOM EDGE BRIGHTENING UNIT PH/1600
For brightening up the colours on ABS edges.
Power W 1600+1600
Tension V 220
STATIC INVERTER FOR MOTORS
- Italy
- Second hand
