Manually controlled single-head pantograph, pneumatic locking of the descent and translation movement of the head through an indirect lever.
The rotation system of the clamp plane allows the piece to be quickly rotated by 90° without unlocking the clamps. This device speeds up and makes the machining operations to be performed on 2 sides of the piece more precise.
By performing through machining operations, up to 4 sides are machined without releasing the piece.
The pneumatic probe with 6 adjustable memories allows for rapid and precise positioning of the machine.
Features Single-head pneumatic pantograph PAN 36
Axis movements on bars and recirculating ball bushes
2 pneumatic horizontal and vertical vices with low pressure device
Descent release with pneumatic control on the handle
Longitudinal and transversal stops referred to metric rods
Adjustable depth stop
Pneumatic micro-mist tool lubrication (emulsified oil)
Probe tip in line with 3-diameter tool
Spindle locking button for tool change
PVC vice jaws adjustable without using keys
Pneumatic translation probe
Service key bag
Use and maintenance manual with CE declaration
HSS single-edge cutter Ø5 L= 68 mm
HSS single-edge cutter Ø10 L= 95 mm
ER16 collet Ø10...9 mm
ER 16 hexagonal ring nut
2 Rods metrics of support stops L=1500 mm
4 Excludable stops
Mask with figures for lock (mounted)
Mask with standard figures
Central jaw for working short profiles (mounted)
2 Profile support rollers L=500 mm
Adjustable leveling feet (mounted)
Air blowing gun for cleaning (mounted)
Three-phase power supply380/400-50/60Volt-HzThree-phase motor power0.35/0.45kW2 Spindle speed6000 / 12000 rpm.X -Y -Z axis travel360 - 120 - 175mmClamp capacity (bxh)200x200mmClamp plane inclination0/90°Maximum cutter diameter10mmProbe tip diameters5 - 8 - 10mmWeight190kg
- Italy
- Nové
